Re-set procedure TVA105

If you have found that your TV/AV IntelliPlug™ is switching your peripherals and Master Device off without any instruction from you or if they switch off after only a few moments, don’t worry the plug isn’t faulty it just needs to re-calibrate itself .
In order to calibrate your plug just follow the simple steps below.
1. Switch off the TV IntelliPlug™ at the mains supply.
2. Wait 5 seconds.
3. Turn on the TV IntelliPlug ™ at the mains supply.
4. Wait 5 seconds.
5. Press the ‘on’ button on your remote control once. (This will activate the IntelliPlug and put your television back in to standby mode.)
6. Wait 5 seconds.
7. Press the ‘on’ button on your remote control again. (This will activate the TV.)
8. Wait 5 seconds.
9. Press the standby button on your remote control. (This will turn off the TV.)

This will calibrate the TV/AV IntelliPlug™. Your television is now ready for use.

Please remember, once the TV IntelliPlug™ is activated you need to press the remote control again to turn on the television.

If the answers we’ve provided here don’t work to resolve your problem then we’re very sorry. We’d like to think we react to our customers’ enquiries (the good, the bad, the ugly) with haste and absolute sincerity. Please email using the form provided, we have a brilliant team standing by. We’re very proud of our product and have spent years earning the respect of our customers and that’s very important to us. In fact, it is vital to our ongoing success.